SKU: API

AMSOIL P.i. Performance Improver Gasoline Additive


Buying Options

Quantity Image Name Price
AMSOIL P.i. Performance Improver Gasoline Additive 1x 354ml Bottle AMSOIL P.i. Performance Improver Gasoline Additive 1x 354ml Bottle
$28.00
In stock

Description

AMSOIL P.i. Performance Improver Gasoline Additive

 

Product Highlights

P.i. improves fuel mileage an average of 2.3% and up to 5.7%. Reduces emissions such as hydrocarbons (HC) up to 15%, carbon monoxide (CO) up to 26% and nitrous oxides (NOx) up to 17%. Restores power and performance. Reduces the need for costly higher octane fuel. (API)

Untreated Fuel Leads to Poor Engine Performance
A vehicle demonstrates its best efficiency and engine performance when it is new. As the engine ages, its performance suffers from gasoline fuel-generated deposits that form on the fuel injectors, intake valves and combustion chamber. Additives are required to control deposit formation.

Today’s fuels, however, lack sufficient treatments of either enough additives or high quality additives. Fuel system deposits result in the following:

  • Lost fuel economy
  • Lost power and poor throttle response
  • Failed emission tests
  • Poor drivability - surging, hesitation, stalling, rough idle
  • Engine knocking (pinging) and rap
  • Difficult starts

Treated Fuel Delivers Maximum Performance
AMSOIL P.i. is the most potent gasoline additive available today. As a concentrated detergent, it is unsurpassed in cleaning combustion chamber deposits, intake valve deposits and port fuel injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines. In engines with accumulated deposits, testing showed AMSOIL P.i. provided the following clean-up benefits after only one tank of gasoline:

  • Improves fuel mileage an average of 2.3% and up to 5.7%
  • Reduced emissions
    • hydrocarbons (HC) up to 15%
    • carbon monoxide (CO) up to 26%
    • nitrous oxides (NOx) up to 17%
  • Restored power and performance
  • Reduced need for costly higher octane fuel
  • Reduced noise from carbon rap and pre-ignition
  • Better drivability
  • Smoother operation

AMSOIL P.i. works as an “emissions passer.” It is ideal for use prior to emissions inspections.

Unsurpassed Deposit Clean-up
Port Fuel Injector Deposits form after the engine has been shut down and there is no gasoline flowing through the injectors. During this “hot soak” period the injectors heat up and the gasoline remaining in the injectors degrades and forms deposits. This can happen very quickly with the use of poor quality gasoline and short trip driving. Because the clearances within the injectors are extremely tight and injectors must deliver precise amounts of “atomized” fuel, even small amounts of deposits can cause injectors to malfunction. Fuel flow is reduced and spray patterns are disrupted, decreasing engine efficiency, power and fuel economy, while increasing exhaust emissions.

Click for larger view

Intake Valve Deposits form on the intake side or back side of the valves. As deposits increase, they restrict airflow and alter airflow patterns in the cylinder. The deposits disrupt the balanced air/fuel ratio by momentarily absorbing and releasing fuel, and they can cause valve sticking by getting in the way of the valve stem and guide. Deposits also restrict proper seating, and the valves may be burned. Intake valve deposits cause lost engine power, increased emissions, poor engine efficiency and potential valve failure.

Click for larger view

Combustion Chamber Deposits form on the top of the pistons and on the cylinder heads. They increase compression and absorb heat during combustion to later release it during the intake cycle. In some engines with tight squish domes, combustion chamber deposits cause the piston to actually hit the cylinder head. This is referred to as combustion chamber deposit interference or “carbon rap.” Combustion chamber deposits also flake off as they get large, and these flakes can get trapped between the valves and valve seat, resulting in compression loss, difficult starting and rough idle.

Higher compression and stored heat cause increased intake fresh charge temperatures and the increased likelihood of pre-ignition “knock” or “pinging” when the fuel spontaneously combusts prior to spark ignition. This increases emissions and may cause engine damage. Many of today’s cars have “knock” sensors that adjust spark timing to prevent knock.

Although audible knock is controlled, power is lost from retarded timing. Higher octane fuels of 4-5 octane numbers can be used to help prevent knock, an effect called “octane requirement increase.”As a vehicle ages, more-expensive,
higher-octane fuel is needed to keep it operating at peak performance. By cleaning combustion chamber deposits, knock is controlled, power is restored, fuel economy increases and higher-octane fuels are less necessary for peak performance.

Click for larger view

Maximum Fuel Economy
AMSOIL P.i. maximizes fuel efficiency by dissolving and removing fuel system deposits and other contaminants for improved power and overall performance.

Click for larger view

Recommendations
Treat one full tank of gas up to 20 gallons with one bottle of P.i. For very large gas tanks, partially fill to 40 gallons and treat with two bottles of P.i. Using more than two bottles per treatment is not recommended. Treat gas every 4,000 miles of service (or 100 hours for marine, stationary and off-road gasoline-powered engines). P.i. helps pass emission tests by running one tank of treated fuel through the engine prior to testing. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10 percent ethanol blended gas. Not recommended for two-cycle engines.

DANGER: Combustible. Harmful or fatal if swallowed. Harmful if inhaled. Skin and eye irritant. Read precautions on container before use.

 

Specifications

SKU API
Brand AMSOIL
Shipping Weight 0.9500kg

Reviews

Be The First To Review This Product!

Help other Ozmotorsport Performance users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


$16.00

or 4 payments of $4.00 with Info

SKU: AGA

AMSOIL Gasoline Additive

See Options

More From This Category


$17.00

or 4 payments of $4.25 with Info

SKU: ADF

AMSOIL Diesel Injector Clean

See Options

$25.50

or 4 payments of $6.38 with Info

SKU: ADD

AMSOIL Diesel Cold Flow

See Options

$24.00

or 4 payments of $6.00 with Info

SKU: ADS

AMSOIL Diesel Injector Clean + Cetane Boost

See Options

$19.00

or 4 payments of $4.75 with Info

SKU: AOB

AMSOIL DOMINATOR® Octane Boost

See Options

$31.00

or 4 payments of $7.75 with Info

SKU: RDCB

AMSOIL Dominator® Coolant Boost

See Options

$24.00

or 4 payments of $6.00 with Info

SKU: ACB

AMSOIL Diesel Cetane Boost ** NEW 2019 **

See Options

$18.00

or 4 payments of $4.50 with Info

SKU: ADB

AMSOIL Diesel All-In-One® **NEW PRODUCT 2019**

See Options

$22.00

or 4 payments of $5.50 with Info

SKU: AQS

AMSOIL Quickshot®

See Options