SKU: SUPRAREARKIT

TOYOTA SUPRA REAR KIT

$3,150.00
In Stock


Calculate Shipping



Standard Shipping - $0.00
Delivery Australia Wide via Courier
Toll Express - $15.00
Delivery Australia Wide via Toll Priority

Description

The main objective of this kit is to provide more rear grip on lowered car. Either if it’s needed to maintain speed with high lock angles in drifting, to get a better start in drag racing or just being faster in circuit racing.

Higher roll center (RC). Lowering the car is very important to increase performance and handling, but this would mess up the original factory designed kinematics. It lowers the roll center and increases camber gain.  On Supra rear suspension the RC is brought back in normal range on lowered car providing higher roll stiffness.

Less camber gain. Supra rear suspension has already a lot of camber gain at original ride height. With lowered car the camber gain gets even bigger. If the car would have only roll motion, then a lot of camber gain wouldn’t be too bad, but during bump motion the camber would change a lot, which would decrease grip. On setup the camber gain is decreased to provide a better grip.

Anti-squat. Original Supra rear suspension has some negative anti-squat. That means the rear would squat a lot during acceleration. Anti-squat is changed to slightly positive to provide more stable motion at rear.

Adjustable spring and shock absorber motion ratio. The shock has 3 attachment possibilities on rear arm, which allows to change suspension stiffness and handling very quickly without changing the spring and messing up ride heights.

Other components, packaging and clearance.
Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
This kit assumes coilovers to have enough clearance. 
Ride height is designed to be ~80mm from front subframe to ground and rear according to front
Dependent on rim width and ET, inner wheel wells need to be slightly modified. 
Minimum rim size is 17”. We have tested the kit with 9,5”x18” ET 35
Maximum tire size that is tested is 265/35 R18

The kit is designed and manufactured the way that after installation and toe adjustment it’s ready to use right away.
For racing use only!

Happy drifting!

Specifications

SKU SUPRAREARKIT
Brand Wisefab

Reviews

Be The First To Review This Product!

Help other Ozmotorsport Performance users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


$4,020.00

SKU: BRZREARKIT

SUBARU BRZ REAR KIT

$4,120.00

SKU: GT86LOCKKIT

TOYOTA GT86 FRONT KIT

$4,020.00

SKU: GT86REARKIT

TOYOTA GT86 REAR KIT


More From This Category


$124.00

or 4 payments of $31.00 with Info

SKU: SPF2862K

Front Control Arm Bush - Inner Lower (SPF2862K)

$844.00 $761.90

or 4 payments of $190.47 with Info

SKU: BMK006

Front & Rear Sway Bar Vehicle Kit (BMK006)

$135.50 $122.55

or 4 payments of $30.64 with Info

SKU: W63322

Rear Control Arm - Upper Outer Bushing (W63322)

$25.00

or 4 payments of $6.25 with Info

SKU: SPF1827K

Panhard Rod Bush - Rear 35mm OD (SPF1827K)

$70.00

or 4 payments of $17.50 with Info

SKU: SPF1750K

Control Arm Bush Kit Rear - Inner Lower (SPF1750K)

$40.00

or 4 payments of $10.00 with Info

SKU: SPF0037K

Leaf Spring Bush Kit - Front (SPF0037K)

$4,120.00

SKU: BRZLOCKKIT

SUBARU BRZ FRONT KIT

$70.00

or 4 payments of $17.50 with Info

SKU: SPF1715K

Front Control Arm Bush Kit - Front Lower (SPF1715K)