Honda D16 (All Series) & ZC Forged H-Beam Conrod Set 5.394" Length

Honda D16 (All Series) & ZC Forged H-Beam Conrod Set 
5.394" Length 
 

The Eagle ESP H-beam connecting rods are a 2-piece, forged, vacuum-degassed, 4340-certified steel construction that provides outstanding strength, while still weighing much less than stock rods. Each rod is multi-stage heat-treated, X-rayed, sonic-tested, magnafluxed, 100 percent machined and then shot-peened to stress-relieve the metal. The rods have precision cap alignment sleeves to positively locate each rod cap, silicon bronze bushings for floating pin models and are available in stroker models that allow additional cam-to-rod clearance for large stroke combinations. They come standard with 190,000 psi rated ARP 8740 and 230,000 psi rated ARP 2000 rod bolts

standard rod for D16, ZC, D16A, D16Z, D16Y. Some block and main girdle clearancing required.. Older design used 5/16" bolt (3/8" head) - torque was 28 ftlbs with moly lube.

Rod Specification

Bolt Type: 3/8" ARP 2000
Pin Fit: Bushed
Maximum HP: 900 
Rod Length: 5.394"
Rod Journal: 1.771"
Pin Size: .748"